久久久久久国产精品无码下_色婷婷精品久久一区综合_久久se精品一区二区国产_91大神精品全国在线观看

PRODUCT

ENTERPRISE BRIEF INTRODUCTION

LPC96P Low Voltage Integrated Monitoring Device

Application Scenarios:Medium /High Voltage Cabinet,Low Voltage Wiring Cabinet

PRODUCT OVERVIEW

The device in line with the distribution network standardized design 0.4kv Los-voltage switchgear design specification requirements,large screen dot matrix display,using 96,shape and very short gauge depth,especially suitable for applications with narrow installation space,industrial standard wide temperature LCD display,with good high and low temperature display characteristics,the terminal can achieve full power measurement and display,including dynamic alarm,switching input and output status,SOE event recording,compound rate,loop load ratio display,harmonics,etc,support dual communication,transmission output function.It has the function of fault judgment such as short circuit,overload,phase loss,phase sequence,and zero break.It adopts snap-on fixed design to improve the efficiency of cabinet assembly,which is suitable for power industry switchgear distribution panel circuit distribution measurement and control.

KEY FEATURES

  • Overall monitoring
  • High level protection
  • Modular design

 

  

Signal Input

Line

Three phase 3 line, 3 phase, 4 line

Frequency

45~65Hz

Voltage

AC 57.7/100V, 230/380V

Over load:1.2 times the rated value(continuous);

1.4 times rated voltage(10s), 2, times the rated value 1s

Power consumption:< 0.5VA (each line)

Current

AC 1A, 5A

Overload: 1.2 times the rated value (continuous);

20 times the rated value /10 second.

Consumption: < 0.25VA (each line)

Accuracy

V、C、P

0.2

Active

0.5s

Reactive

2

Zero Current (residue)

20mA~1A(±1%); 1A~2A(±2.5%)

Harmonic Sampling

128point/cycle, FFT method,breakdown judging

Power Supply

Range: AC/DC 85V~265V

Consumption: main power consumption≤5VA.

Relay Output

Touch point type: normally open (level output jog mode)

Touch point capacity: AC 250V/3A  DC 30V/3A.

Power Pulse Output

Output mode: optocoupler pulse of open collector

Switch Alue Output

Support dry contact input, DC12V power supply built-in;

Resolution≤5mS

Communication

RS485 interface Modbus-RTU protocol or LT645 stipulation;

Lora, zigbee (wireless communication optional)

Security

Working Pressure

Among APS, voltage signal, current signal AC 2kV/1min;

Working frequency among switch value, pulse output, communication, AC 1kV/1min.

Insulation resistance

Input, output terminal to the chassis>100MΩ.

Electromagnetic

Compatibility

Reach IEC 61000 standard (level 4)

Level of Protection

IP51 (front), IP30 (inside)(except for terminal)

Working Life Designed

10years

Working

Environment

 

Meter Working Temperature: -25℃~+80℃;

LCD Working Temperature: -20℃~+80℃;

Storage Temperature: -40℃~+85℃;

Relative Humidity: ≤99% no condensation;

Elevation: ≤2500m.

 
 

LPC96P Low Voltage Integrated Monitoring Device